Bolt anchor FBN II

The cost-efficient fixing for flexible use in non-cracked concrete

Download PDF version

Applications

  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
ZI_ETA_07-0211-FBNII_N_#SEN_#AIS_#V1.jpg L_ROSTFREI01_N_#SEN_#AIS_#V1.jpg ZI_B_01_R120_N_#SEN_#AIS_#V1.jpg

Description

Versions

  • zinc-plated steel
  • stainless steel
  • hot-dip galvanised steel

Building materials

Approved for:

  • Concrete C20/25 to C50/60, non-cracked

Also suitable for:

  • Concrete C12/15
  • Natural stone with dense structure

Advantages

  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Product overview

galvanized

Type Art.-No. ETA 3D-CAD Drill hole diameter Anchor length Max. usable length hef,stand/hef,red
do
l
tfix
[mm] [mm] [mm]
FBN II 6/10 505527 relevant 6 55 10/-
FBN II 6/30 505528 relevant 6 75 30/-
FBN II 6/5 505526 relevant 6 50 5/-
FBN II 8/10 040664 relevant 8 71 10/20
FBN II 8/20 040669 relevant 8 81 20/30
FBN II 8/30 040700 relevant 8 91 30/40
FBN II 8/5 040662 relevant 8 66 5/15
FBN II 8/50 040771 relevant 8 111 50/60
FBN II 8/70 040777 relevant 8 131 70/80
FBN II 8/100 040783 relevant 8 161 100/110
FBN II 10/10 040827 relevant 10 86 10/20
FBN II 10/20 040851 relevant 10 96 20/30
FBN II 10/30 040854 relevant 10 106 30/40
FBN II 10/50 040855 relevant 10 126 50/60
FBN II 10/70 040931 relevant 10 146 70/80
FBN II 10/100 040943 relevant 10 176 100/110
FBN II 10/140 040944 relevant 10 216 140/150
FBN II 10/160 040945 relevant 10 236 160/170
FBN II 12/10 040950 relevant 12 106 10/25
FBN II 12/20 044558 relevant 12 116 20/35
FBN II 12/30 045263 relevant 12 126 30/45
FBN II 12/50 045264 relevant 12 146 50/65
FBN II 12/80 045265 relevant 12 176 80/95
FBN II 12/100 045266 relevant 12 196 100/115
FBN II 12/120 045267 relevant 12 216 120/135
FBN II 12/140 045268 relevant 12 236 140/155
FBN II 12/160 045269 relevant 12 256 160/175
FBN II 16/25 045564 relevant 16 145 25/40
FBN II 16/50 045565 relevant 16 170 50/65
FBN II 16/80 045566 relevant 16 200 80/95
FBN II 16/100 045567 relevant 16 220 100/115
FBN II 16/140 045568 relevant 16 260 140/155
FBN II 16/160 045569 relevant 16 280 160/175
FBN II 16/200 045570 relevant 16 320 200/215
FBN II 20/30 045573 relevant 20 187 30/55
FBN II 20/60 045574 relevant 20 217 60/85
FBN II 20/80 045575 relevant 20 237 80/105
FBN II 20/120 045576 relevant 20 277 120/145

A4

Type Art.-No. ETA 3D-CAD Drill hole diameter Anchor length Max. usable length hef,stand/hef,red
do
l
tfix
[mm] [mm] [mm]
FBN II 6/10 A4 505532 relevant 6 55 10/-
FBN II 6/30 A4 505535 relevant 6 75 30/-
FBN II 8/10 A4 507555 relevant 8 71 10/20
FBN II 8/30 A4 507556 relevant 8 91 30/40
FBN II 8/50 A4 507557 relevant 8 111 50/60
FBN II 10/10 A4 507558 relevant 10 86 10/20
FBN II 10/20 A4 507559 relevant 10 96 20/30
FBN II 10/30 A4 507560 relevant 10 106 30/40
FBN II 10/50 A4 507561 relevant 10 126 50/60
FBN II 10/100 A4 507562 relevant 10 176 100/110
FBN II 12/10 A4 507563 relevant 12 106 10/25
FBN II 12/20 A4 507564 relevant 12 116 20/35
FBN II 12/20 A4 507565 relevant 12 126 30/45
FBN II 12/20 A4 507566 relevant 12 146 50/65
FBN II 12/100 A4 507567 relevant 12 196 100/115
FBN II 16/10 A4 507568 relevant 16 130 10/25
FBN II 16/25 A4 507569 relevant 16 145 25/40
FBN II 16/50 A4 507570 relevant 16 170 50/65
FBN II 20/30 A4 507571 relevant 20 187 30/55
FBN II 20/60 A4 507572 relevant 20 217 60/85

hot dipped galvanized

Type Art.-No. ETA 3D-CAD Drill hole diameter Anchor length Max. usable length hef,stand/hef,red
do
l
tfix
[mm] [mm] [mm]
FBN II 8/10 fvz 507575 8 71 10/20
FBN II 8/30 fvz 507576 8 91 30/40
FBN II 8/50 fvz 507577 8 111 50/60
FBN II 8/70 fvz 507578 8 131 70/80
FBN II 10/10 fvz 507579 10 86 10/20
FBN II 10/30 fvz 507580 10 106 30/40
FBN II 10/50 fvz 507582 10 126 50/60
FBN II 10/100 fvz 507583 10 176 100/110
FBN II 12/10 fvz 507589 12 106 10/25
FBN II 12/30 fvz 507591 12 126 30/45
FBN II 12/50 fvz 507592 12 146 50/65
FBN II 12/100 fvz 507596 12 196 100/115
FBN II 16/25 fvz 507598 16 145 25/40
FBN II 16/50 fvz 507553 16 170 50/65
FBN II 16/100 fvz 507554 16 220 100/115
FBN II 20/30 fvz 508015 20 187 30/55

Functionality

Functioning

  • The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
  • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
  • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
  • The head embossing offers a simple control of the anchoring.
  • In the case of series installation, we recommend using the FABS bolt anchor setting tool.
M_G_01_FBNII_F_#SALL_#AIS_#V2.jpg M_G_02_FBNII_F_#SALL_#AIS_#V2.jpg M_G_03_FBNII_F_#SALL_#AIS_#V2.jpg M_G_04_FBNII_F_#SALL_#AIS_#V2.jpg M_G_05_FBNII_F_#SALL_#AIS_#V2.jpg

Downloads

Technical documents

Title Type Date of grant Valid to
Load table
  • Format: PDF
  • File size: 40 KB
Load table
ETA-07/0211 (gvz oder A4)
  • Format: PDF
  • File size: 633 KB
ETA Option 7 (European Technical Approval) 09/04/2013 26/09/2017
DoP No. 0756-CPD-0296
  • Format: PDF
  • File size: 1.52 MB
DOP - Declaration of Performance